Setting Tool Series CV Short

Part Number

Series CV Short

Material

Tool Steel, Heat Treated

Overview

Setting Tool for Koenig Series CV sealing plugs with reduced shank length. The Series CV Short setting tool is manufactured from durable tool steel and heat treated to HRC 50. When you need to repeatedly install Series CV short sealing plugs with complete reliability, the CV Short Setting Tool can be trusted to perform accurately.

Used with an Express 3000/5000 table press for precise and efficient installation of Series CV Expanders.

Alternatively, small quantities or single parts can be installed with a hammer and a setting tool. Installation can also be done with an arbor press. Stroke travel should be limited when using a press due to difficulty controlling insertion forces.

Product Highlights

Heat treated tool steel with a hardness of Approx. HRC 50

Compatible with Express 3000 and Express 5000

Technical Specs

Hardness

Approx. HRC 50

Dimensions In

Inches

Part Number	d1 Expander	d3 ±0.005	l1	d2	l2	x ±0.004	(s) ~ Ref.	Weight in gram/pcs.

HT-CVI-125	CV XXX-125S	0.375	5	0.111	0.3	0.007	0.042	62
HT-CVI-156-S	CV XXX-156S	0.375	5	0.142	0.3	0	0.04	63
HT-CVI-187	CV XXX-187S	0.375	5	0.173	0.4	0.01	0.066	63
HT-CVI-218	CV XXX-218S	0.375	5	0.204	0.5	0.01	0.063	63
HT-CVI-250	CV XXX-250S	0.375	5	0.236	0.6	0.01	0.083	63
HT-CVI-281-S	CV XXX-281S	0.375	5	0.267	0.8	0	0.091	63
HT-CVI-312	CV XXX-312S	0.375	5	0.298	1.3	0.01	0.107	62
HT-CVI-343	CV XXX-343S	0.5	5	0.329	1.5	0.01	0.118	100
HT-CVI-406	CV XXX-406S	0.5	5	0.392	1.5	0.01	0.143	108

Series MB/CV Plug Removal Instructions

Series MB/CV Installation Instructions

RECOMMENDED SETTING EQUIPMENT FOR SERIES CV SHORT
EXPRESS 3000	Hydropneumatic Table Press	See EXPRESS 3000 page
EXPRESS 5000	Hydropneumatic Table Press	See EXPRESS 5000 page

GET IN TOUCH

For more information on the Koenig range, to chat about an application or to request an engineer to call or visit, please don’t hesitate to call or fill out the below form.

"*" indicates required fields